Home | About Fylde | Applications | Products | Data Sheets | Contact Us | Search
          |
The FE-MM8, FE-MM16 and FE-MM40 systems are available with a USB interface. Each system with its USB module inserted provides you with 400 kHz total sample rate (16 bit samples). For the FE-MM8 this is 50 k samples per second on each channel and for the FE-MM16 it is 25 k samples per second on each channel. The FE-MM40 provides up to 10 k samples per second per channel. The FE-MA32/40 and FE-MM4 systems are for signal conditioning only and do not have USB interface You get plug and play operation, software support for DASYLab, LabView and C++, and ready to run MADAQ data acquisition software is included. If you need a customised version, we are the designers and manufacturers of both the hardware and software so just contact us with your requirements and we will work with you to provide an optimised solution. |
The Micro Analog 2 FE-MM40 USB data acquisition system is a chassis (FE-MM40) fitted with a USB interface module (FE-357-USBM which extends the FE-357-USB with an off board multiplexer).
The Micro Analog 2 FE-MM16 USB data acquisition system is a chassis (FE-MM16) fitted with a USB interface module (FE-357-USB).
The Micro Analog 2 FE-MM8 USB data acquisition system is a chassis (FE-MM8) fitted with a USB interface module (FE-356-USB). You can fit up to 8 channels of a variety of plug in signal conditioning modules.
You can fit a variety of plug in signal conditioning modules making the system a powerful and versatile way to connect any transducer to a PC.
You can connect directly to the protected A to D inputs or Digital I/O without using signal conditioning modules.
The system is provided with ready to run MADAQ data acquisition software to operate on any Windows 2000 or XP computer and includes drivers for LabView and DASYLab software. Programmers can also use Visual Basic or C/C++ . For software updates visit our Download Page
OEM users may wish to use Fylde MADAQ data acquisition software as a starting point for their bespoke application. MADAQ is LabVIEW based and Fylde will make the source available to any OEM. Alternatively we will customise MADAQ software to your requirement.
FE-MM8 with USB
|
The FE-356-USB module makes the FE-MM8 into a complete USB data acquisition system. The module not only handles the flow of the sampled data to the host computer, but also maintains the auto zero function for any installed transducer amplifiers. USB technology is plug and play so your computer will automatically recognise the FE-356-USB as a new device and install the software for it. |
||||||||||||||||||
FE-356-USB Interface Module
8 channel 16 bit A to D converters with USB 1.1 interface. 8 x 50 kS/s. This module provides all the functions of the Auto Zero module and the USB interface. The module can only be fitted in a FE-MM8 chassis. |
|
||||||||||||||||||
FE-357-USB Interface Module
2 x 8 multiplexor with 8 channel 16 bit A to D converters with USB 1.1 interface. 16 x 25 kS/s. The module can only be fitted in a FE-MM16 chassis. |
|
||||||||||||||||||
FE-357-USBM Interface ModuleA similar module to the above is the FE-357-USBM which works with an external multiplexer to provide 40 channels of A to D conversion. This module can only be used in the FE-MM40 chassis |
|
||||||||||||||||||
|
A data sheet is available for the FE-MM8 system hardware.(PDF format) |
Download Data Sheet |
||||||||||||||||||
|
A data sheet is available for the FE-MM16 system hardware.(PDF format) |
Download Data Sheet |
||||||||||||||||||
|
A data sheet is available for the FE-MM40 system hardware.(PDF format) |
Download Data Sheet |
||||||||||||||||||
|
Free MADAQ software is provided with all FE-MM8 and FE-MM16 USB systems. You can download a MADAQ demonstration which uses a simulated set of signals in place of the USB hardware from our Download Page |
Download MADAQ Data Sheet |
This page is maintained by Fylde Electronic Laboratories Ltd.
