Home | About Fylde | Applications | Products | Data Sheets | Contact Us | Search
         |
The screw lock input connectors accept adaptors for different applications. For example coaxial connector adaptors for accelerometer signals or screw terminals with built in Cold Junction Compensation for Thermocouples. The multiway output connector may be used with a BNC connector adaptor, or you can connect directly to your data acquisition system using an adaptor cable. |
|
CA-386-TC Thermocouple Adaptor |
CA-386-TC Thermocouple Adaptor allows the connection of up to two type K thermocouples. The unit includes the temperature measurement device which controls the action of the cold junction compensation. This adaptor is always used with the FE-386-TC dual thermocouple amplifier module |
|
7PINSKT Standard Dual Input Connector |
The standard 7 pin screw lock connector is a high quality connector suitable for use with the FE-366-TA module, FE-376-IP module, or FE-396-FV module. |
|
CA-366-TB Terminal Block Adaptor |
The CA-366-TB is an adaptor which allows the connection using screw terminals of a pair of transducers to the FE-366-TA module, FE-376-IP module, or FE-396-FV module. |
|
CA-376-IP Coaxial Connector Adaptor |
The CA-376-IP is an adaptor for transducers which terminate in coaxial (BNC) connectors. Typically used with the FE-376-IP ICP® amplifier module, it is also suited to the FE-396-FV Frequency to Voltage converter module, and the FE-366-TA transducer amplifier. |
|
CA-366-RTD |
The CA-366-RTD is an adaptor which enables the FE-366-TA module to be used with RTD type temperature transducers. |
|
FE-MAC-40C |
The MAC-40C is an adaptor which provides the (up to 40) outputs of the FE-MA32/40 system as BNC connections. It also provides a 9 pin connector which carries the control and monitoring signals for Auto-Zero and Calibration. A similar adaptor MAC-8C is available for the FE-MM8 system. |
This page is maintained by Fylde Electronic Laboratories Ltd.
